IRF HPE switch的軔體升級

IRF HPE switch的軔體升級

使用機型5940*2 (JH390A)

使用韌體R2609

1.先使用TFTP上傳韌體

<HPE5940-Core>tftp 1.1.1.2 get 5940-CMW710-R2609.ipe

Press CTRL+C to abort.

 % Total    % Received % Xferd  Average Speed Time    Time Time Current

                                Dload Upload Total Spent Left  Speed

100  122M 100  122M 0   0 192k 0  0:10:49 0:10:49 --:--:--  194k

Writing file...Done.

2.使用指令確認上傳成功

<HPE5940-Core>dir

Directory of flash:

  0 -rw-   128031744 Jan 01 2011 09:51:15   5940-CMW710-R2609.ipe

  1 -rw-    17256448 Sep 14 2017 00:00:00   5940-cmw710-boot-r2510p02.bin

  2 -rw-    87812096 Sep 14 2017 00:00:00   5940-cmw710-system-r2510p02.bin

  3 drw-           - Jan 01 2011 08:04:57   diagfile

  4 -rw-         735 Jan 01 2011 08:32:10   hostkey

  5 -rw-        4986 Jan 01 2011 09:23:57   ifindex.dat

  6 drw-           - Jan 01 2011 08:35:40   license

  7 drw-           - Jan 01 2011 08:03:46   logfile

  8 drw-           - Jan 01 2011 08:32:19   pki

  9 drw-           - Jan 01 2011 08:04:57   seclog

 10 -rw-         591 Jan 01 2011 08:32:10   serverkey

 11 -rw-       25253 Jan 01 2011 09:23:58   startup.cfg

 12 -rw-      349045 Jan 01 2011 09:23:58   startup.mdb

 13 drw-           - Jan 01 2011 08:05:22   versionInfo

1048576 KB total (815404 KB free)

3.使用boot-loader指令將檔案載入switch(因為IRF內的member都需要載入，所以slot的部份要選all)

<HPE5940-Core>boot-loader file flash:/5940-CMW710-R2609.ipe all main

Verifying the file flash:/5940-CMW710-R2609.ipe on slot 1...........Done.

HPE FF 5940 48SFP+ 6QSFP28 Switch images in IPE:

 5940-cmw710-boot-r2609.bin

 5940-cmw710-system-r2609.bin

This command will set the main startup software images. Continue? [Y/N]:y

Add images to slot 1.

Decompressing file 5940-cmw710-boot-r2609.bin to flash:/5940-cmw710-boot-r2609.bin.........................Done.

Decompressing file 5940-cmw710-system-r2609.bin to flash:/5940-cmw710-system-r2609.bin............................................................................................................................................Done.

Verifying the file flash:/5940-cmw710-boot-r2609.bin on slot 1...%Jan  1 09:57:29:796 2011 HPE5940-Core IFNET/3/PHY_UPDOWN: Physical state on the interface M-GigabitEthernet0/0/0 changed to down.

%Jan  1 09:57:29:798 2011 HPE5940-Core IFNET/5/LINK_UPDOWN: Line protocol state on the interface M-GigabitEthernet0/0/0 changed to down.

Done.

Verifying the file flash:/5940-cmw710-system-r2609.bin on slot 1..........Done.

The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 1.

Loading.....................%Jan  1 09:58:01:079 2011 HPE5940-Core DEV/4/BOARD_LOADING: Board in slot 2 is loading software images.

..........%Jan  1 09:58:11:463 2011 HPE5940-Core DEV/5/LOAD_FINISHED: Board in slot 2 has finished loading software images.

.........................Done.

Loading.....................%Jan  1 09:58:56:236 2011 HPE5940-Core DEV/4/BOARD_LOADING: Board in slot 2 is loading software images.

..............................................%Jan  1 09:59:42:701 2011 HPE5940-Core DEV/5/LOAD_FINISHED: Board in slot 2 has finished loading software images.

........................................................................................................................................Done.

Verifying the file flash:/5940-cmw710-boot-r2609.bin on slot 2.....Done.

Verifying the file flash:/5940-cmw710-system-r2609.bin on slot 2...................Done.

The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 2.

Decompression completed.

4.依照情況選擇是否要刪除韌體檔案

Do you want to delete flash:/5940-CMW710-R2609.ipe now? [Y/N]:n

5.之後尋找合適的時間存檔並重開機即可